Just another My blog Sites site
In order to take the pictures in this project we had to go in a dark room with the camera set up on a tripod to that there was no motion whatsoever . The camera lens had to be open for about 10-15 seconds so that it could absorb all of the light. The part that worked was figuring out the camera settings but the part that was the most difficult was getting the design correct. It was really frustrating when we ran out of time to finish the drawing. You can see more of my photos here.
In this project many things worked and many things did not work for example finding the best angle did not work all the time but lining up the object to rule of thirds was really easy and worked. My thoughts on rule of third changed because I used to think it did not matter where the object was but now I think it does matter a lot more because it changes the way you look at something.Down below you can see an example of rule of thirds. Also you can click here to see more.
The process it took to take these photos was to change the shutter speed, the ISO, and the F stop. to edit these photos i had to change the brightness and crop out any unwanted background. the thing that worked was getting clean and nice photos. The thing that did not work was making sure that there was no light on the background because that was very difficult. Down below are some photos that show this project.
To take these photos and make them good we had to change the shutter speed on the camera and change the ISO. In order to make the photos good with editing we had to crop out any brown or yellow photos and at the bottom we had to add our logo. The thing that worked in our project is that we didn’t have any yellow corners in our photo because the setting were good. The thing that didn’t work was that my group and I were very confused with the shutter speed and the ISO level.
